Not only is the Mini-Flow 1 compact and versatile, it also offers features that are unique. Few bag dump stations or bin vents offer the ease of external filter replacement. When the Mini-Flow 1 is used as a receiver or a mini dust collector, a centrally positioned inlet baffle directs dust and material down and away from the filter elements, lessening dust loading and extending filter life.

Find out more about the Mini-Flow 1 by browsing through the information below or jump directly to the items that interest you in the following list.

• Applications
• Construction
• Dimensions & Specifications
• Options
• Electrical Requirements
• Pneumatic Requirements

Applications: The Mini-Flow 1 can fit where other dust collectors can’t. This can mean less or no ducting, cheaper installation costs, and less space required. The Mini-Flow 1 can be furnished with or without a powered air mover and can be configured to serve as a two-cartridge dust collector, a bin vent, a receiver-filter unit, or a bag dump filter.

Construction: The Mini-Flow 1 is constructed of 14 gauge welded steel and is designed to withstand a differential pressure of +/- 36" H₂O. The Mini-Flow 1 contains two 16" x 8" diameter standard 56 ft² filter cartridges and is furnished with a Magnahelic ^TM differential pressure gauge. The cartridge cleaning is effected by a solid-state timer, pilot valves, and two ¾" diameter diaphragm valves. All standard Mini-Flow 1 collectors are powder painted inside and out to resist corrosion.

Dimensions & Specifications:

Options: Being one of the most versatile collectors available today, the Mini-Flow 1 unit is available with many options.

• Fan for specific application required
• Photohelic^TM differential pressure gauge for demand cleaning
• 30-gallon drum receiver cover, flex hose, and discharge gate
• Pulse manifold heater and cover
• High-pressure or corrosive atmosphere construction
• Abrasion-resistant inlet baffle
• Pre-wired control panel for fan or blower units
• Customer-specified finish type and color

Electrical Requirements: All units require 110v single-phase current to the pulse timer. Mini-Flow units with fans or blowers may have other electrical requirements.

Pneumatic Requirements: All units come with a ½" diameter NPT air supply tap. Compressed air should be clean, dry, and between 80 and 100 PSI. Compressed air volume depends on pulse frequency and duration.